SMALL FIXES. CLEARER MISSIONS.

Nexi’s Tech Tips

A little Jedi guidance for everyday technology trouble. Choose a tip, follow your company’s IT policy and stop when the next step needs your technology team.

Nexi, your friendly Digital Jedi guide
BEFORE YOU TRY A TIP

Tech tips & third-party links disclaimer

These tips and links are provided for general information and convenience. They are not a diagnosis, a guarantee of results or a substitute for your organization’s IT policies. Follow your company’s approved procedures, save your work and contact your IT team if you are unsure about a step.

Third-party websites are independently operated. Comnexiom does not control their content, availability, security or privacy practices. Review the provider’s instructions and policies before using a linked site or submitting information.

To the extent permitted by applicable law, Comnexiom is not responsible for any loss, damage, downtime, data loss, security issue or other consequence resulting from following these tips, taking or failing to take action based on them, or accessing or using third-party links, websites or services. No particular outcome is promised.

Accessibility

Make Windows 11 text easier to read

Small text should not require Jedi eyesight. Adjust text size on your own Windows 11 device using the built-in preview.

  1. Press Windows + U to open Accessibility settings.
  2. Choose Text size, then move the slider until the sample is comfortable to read.
  3. Select Apply and check the text in the Windows interface and the applications you use. Some applications may respond differently.
  4. If the result feels cramped, return to Text size and adjust the slider again. Follow your organization’s device policy.

Success check: supported text is easier to read without changing display resolution. If the setting is unavailable or an application still has tiny text, ask IT about its supported viewing options rather than installing an unfamiliar utility.

Added

Microsoft text-size guidance ↗

Accounts & security

Capture a useful support screenshot

A clear image can save a round trip with support.

  1. On Windows, press Windows + Shift + S and select the relevant error.
  2. Check the image for passwords, client data, financial details and unrelated messages before sharing.
  3. Send it only through your approved support channel with the time, application and steps that triggered the error.

Report a suspicious message

Unexpected urgency deserves a pause, not a click.

  1. Do not open the attachment, follow the link, reply or approve an unexpected MFA request.
  2. Verify the request using a phone number or support channel you already trust.
  3. Use your company’s reporting method. If you clicked or entered information, tell IT immediately and describe what happened.

Reset a Microsoft 365 work password

Use your organization’s approved password-reset route. Never send your password or a verification code to Nexi or another person.

  1. Open Microsoft’s work-account password reset from a trusted device.
  2. Enter your work account and complete the verification methods your organization enabled.
  3. If self-service reset is unavailable or your security information is out of date, contact your IT team through a known channel.
  4. Choose a unique password, update your password manager and sign in again when prompted.
Microsoft guidance ↗

Browsers

Reopen an accidentally closed Chrome tab

Lost a tab in hyperspace? Try this shortcut before starting your search again.

  1. Return to the Chrome window where you were working.
  2. On Windows or Linux, press Ctrl + Shift + T. On a Mac, press Command + Shift + T.
  3. Repeat the shortcut if needed to bring back earlier closed tabs in the order they were closed.
  4. Check that the restored page is the one you intended before continuing. A reopened page does not guarantee recovery of unsaved form entries.

Success check: the page you need is visible again. If it is not, open the site from a trusted bookmark rather than an unfamiliar recovery link.

Added

Google Chrome guidance ↗

Reset an unexpectedly zoomed Edge page

A page suddenly looks enormous or tiny? Check page zoom before changing the computer’s display settings. These steps are for Microsoft Edge on Windows.

  1. Select the affected web page in Edge. Finish any typing so the keyboard shortcut is not confused with text entry.
  2. Press Ctrl + 0 (the number zero) to return the page to the browser’s default zoom level. This is not necessarily 100% if a different default is configured.
  3. For a more comfortable view, open Settings and more (…) and use the Zoom plus or minus controls. This adjusts page magnification rather than Windows display resolution.
  4. Review the page again. Compare another familiar website if the layout still looks unusual; avoid repeatedly changing unrelated display settings.

Success check: the page is readable and its controls are usable. If only one site remains broken, note the site and symptom for IT. Do not reset the whole browser, remove security extensions or install a “repair” tool.

Added

Microsoft Edge zoom guidance ↗

Devices & printing

Arrange two Windows apps side by side

Compare a document and an approved business app without constantly switching windows. These steps are for Windows 11.

  1. Open the two apps you want to view. Select the first app window.
  2. Press Windows + Left Arrow to place it on the left half of the screen.
  3. If Snap Assist shows the other app, select it. Otherwise select that app and press Windows + Right Arrow.
  4. Check both windows are readable. Drag their shared divider to adjust the space, or use each window’s maximize button to return to a larger view.

Success check: both apps are visible together. Some apps have minimum window sizes or do not support snapping. If the shortcut has no effect, ask IT before changing managed settings; no extra window-management software is needed.

Added

Microsoft Snap guidance ↗

Check whether a problem affects one device

A quick comparison helps your Jedi choose the next step.

  1. Note whether one application, one device or several people are affected.
  2. Compare with another approved device or application without disconnecting shared network equipment.
  3. Record the location, time and exact symptom. Keep your findings ready for the support team.

Check your microphone before a call

Give your voice a preflight check in Windows 11 before the meeting begins. Use an already-connected microphone or approved headset.

  1. Finish any active call, then open Start → Settings → System → Sound.
  2. Under Input, select the microphone you want to check and open its properties.
  3. Under Input settings, choose Start test. Say a short, non-sensitive phrase, then choose Stop test.
  4. Choose Play to listen to the sample. If needed, adjust Input volume and repeat the test.

Success check: you can hear your voice in the sample. If the microphone is missing or the sample stays silent, note the device name and contact IT. If Windows passes but your meeting app does not, check that app’s selected microphone; do not change organization security settings.

Added

Microsoft microphone guidance ↗

Restart a printer without resetting it

Coordinate a shared printer restart so you do not interrupt someone else’s job. Follow the manufacturer’s instructions.

  1. Check paper, toner or ink, covers and the displayed error first.
  2. If no job or firmware update is active, switch the printer off using its power control.
  3. Wait about 60 seconds, then switch it back on and allow it to finish starting.
  4. Confirm the correct printer is selected and try a small test print. Ask IT before deleting shared queues, reinstalling drivers or changing network settings. Do not factory-reset the printer.
Microsoft guidance ↗

Restart your computer cleanly

Save first. Restarting closes running applications.

  1. Save files and finish or pause uploads and other important work.
  2. On Windows, choose Start → Power → Restart. Allow updates to finish; do not force power off during an update.
  3. Sign in again and test the original problem once. If it returns, record the error and ask IT rather than repeatedly restarting.

Email & calendars

Schedule an Outlook email for a better time

Prepare a routine message now and choose when it should leave the launch pad. For new Outlook for Windows and Outlook on the web; IMAP and POP accounts do not support this new-Outlook feature.

  1. Compose your message and check recipients, attachments and wording. Follow your company’s communication policy.
  2. Open the dropdown beside Send and choose Schedule send.
  3. Choose a suggested delivery time or a custom date and time. Check the displayed time carefully before selecting Send to schedule it.
  4. Look in Drafts for the scheduled message until its delivery time. To change plans, open it and select Cancel send before the scheduled time; review it before scheduling again.

Success check: the message is waiting in Drafts for its scheduled delivery. Do not rely on scheduling for urgent or time-critical notices. If the option is missing, ask IT which Outlook version and account features you have; classic Outlook uses different steps.

Added

Microsoft scheduled-email guidance ↗

Network checks

Compare Wi-Fi symptoms before changing equipment

Find the weak signal in the Force without disrupting the whole office.

  1. Check that Wi-Fi is on and you selected the approved business network.
  2. Compare the same device nearer an access point and compare another device in the original location.
  3. Record whether the issue is slow speed, disconnection or no internet. Use the Wi-Fi wizard for a guided checklist, or contact IT before restarting shared network equipment.
Microsoft guidance ↗

Read your Windows network details

This read-only check does not reset your connection.

  1. Open Command Prompt on Windows.
  2. Enter ipconfig to see adapter names, IP addresses and the default gateway.
  3. If IT requests more detail, enter ipconfig /all. Share the output only through your approved support channel; it can reveal device and network details.
Microsoft guidance ↗

Renew a Windows DHCP address

This interrupts the selected connection. Use only on your own DHCP-configured Windows device with IT approval. Do not use during a remote-support session, VPN-dependent work, calls or uploads. Do not use for a static address, server, network appliance or shared system.

  1. Save work and make sure you can contact IT without this connection. Ask IT if you are unsure whether DHCP is enabled.
  2. In Command Prompt, enter ipconfig and identify the intended adapter. These examples use an adapter named Wi-Fi; replace that name with the correct adapter name confirmed by IT.
  3. Enter ipconfig /release "Wi-Fi". The selected adapter loses its current IPv4 DHCP configuration.
  4. Enter ipconfig /renew "Wi-Fi" to request a DHCP lease again. A different address is not guaranteed.
  5. Test the connection once. If renewal fails or you still cannot connect, contact IT. Do not keep changing DNS, firewall or router settings.
Microsoft guidance ↗

When the mission needs a Jedi.

These tips are general guidance, not a substitute for your organization’s policies or a diagnosis. If the next step could affect security, shared systems or business data, stop and contact your technology team.

Meet Nexi ↗
Talk to your technology Jedis ↗
A VIRTUAL MISSION BRIEFING

Book a Jedi

Choose a time with Jeff Davis. Stay right here on the page.

Need help? Email Comnexiom or call (770) 580-0440.